8580 SID¶
Sound Interface Device
Pinout¶
+-----\/-----+
Cap 1a --|01 28|-- Vdd
Cap 1b --|02 27|-- AUDIO OUT
Cap 2a --|03 26|-- EXT IN
Cap 2b --|04 25|-- Vcc
RES_l ->|05 24|-- POT X
Φ2 ->|06 23|-- POT Y
R/W_l ->|07 22|<> D7
CS_l ->|08 21|<> D6
A0 ->|09 20|<> D5
A1 ->|10 19|<> D4
A2 ->|11 18|<> D3
A3 ->|12 17|<> D2
A4 ->|13 16|<> D1
GND --|14 15|<> D0
+------------+
Signal Description¶
Pin(s) |
Signal |
Direction |
Description |
---|---|---|---|
1-2 |
CAP 1A, 1B |
N/A |
Capacitor filter connections. |
3-4 |
CAP 2A, 2B |
N/A |
Capacitor filter connections. |
5 |
RES_l |
in |
Reset input: A low pulse initializes SID. |
6 |
Φ2 |
in |
CPU Φ2 clock in. |
7 |
R/W_l |
in |
CPU read/write input. |
8 |
CS_l |
in |
Chip Select input. |
9-13 |
A0-A4 |
in |
CPU Address lines. |
14 |
Vss |
N/A |
Vss, 0V (GND). |
15-22 |
D0-D7 |
in/out |
Data bus. |
23
24
|
POT X
POT Y
|
N/A
N/A
|
These pins are inputs to the A/D converters used to digitize the position of potentiometers. The conversion process is based on the time constant of a capacitor tied from the POT pin to ground, charged by a potentiometer tied from the POT pin to +5V DC. |
25 |
Vcc |
N/A |
+5V DC. |
26 |
EXT IN |
N/A |
This analog input allows external audio signals to be mixed with the audio output of SID or processed through the Filter. |
27 |
AUDIO OUT |
N/A |
Audio Output of SID. As the output of SID rides at a 6V DC level, it should be AC-coupled to any audio amplifier with an electrolytic capacitor in the 1-10 µF range. |
28 |
Vdd |
N/A |
Vdd, reference voltage. Connected to +12V DC (6581), +9V DC (6582, 8580). |